BECKER electric motors come with a 5-year Guarantee.
Becker RF 12NM Motor Australia began in 2007, bringing all the ideals and philosophies of the German Head Office to the local market. Today, Becker RF 12NM Motor Australia is one of the leading suppliers of sun protection automation in Australia.
In 1968 they released their first tubular drive for the automation of roller shutters. Becker RF 12NM Motor has since continually developed and improved its range of drives and today produces a high-quality and innovative range.
The radio-controlled Becker RF 12NM Motor is the most advanced in the range. Perfect for the renovation market where wiring to a switch can leave unsightly conduit or damage to walls and ceilings. Only 240v power is required to the point where the Roller Shutters are mounted, there is no wiring required to the control point. The shutter can then be operated by either a handheld or wall-mounted remote control!
Easily programmable intermediate positions are available to the consumer. This allows you, the consumer, to set your favourite sun position which is remembered each time you would like the blind operated. The radio-controlled motors also offer dynamic torque adjustment which enables the motor to adjust the end limits as there are changes in the Roller Shutter element. This also reduces the need for service calls commonly required to make these adjustments.
Timers and sun sensors can be used with the PROF motors to allow automatic movement of the shutter. Whether it is by a preset time of day with a Becker RF 12NM Motor timer or as the sun hits the window through a Becker sun sensor, your shutters can work even when you are not at home. This allows you the ultimate benefit of your window shutters. These sensors all communicate wirelessly with the motor, further reducing wiring requirements. The Becker RF 12NM Motor can also be connected to a BMS (Building Management System).
Up/Down Limit Setting
The Up/Down limit setting is manually done with 2 recessed progressive limits yellow/white on the motor head. The instructions for limit setting come with the motor.
Features
- Supply Voltage – 230V 50Hz motor
- Torque – 12NM
- Speed – 17 rpm
- Operating the tubular motor with a switch
- Adjustment by turntables
- With 2.5 meters of wire.
- Lifting Capacity – 23Kg
- Protection Level – IP44
- Current Consumption – 0.50A
Highlights
- Universal motor – Suitable for Roller Shutter and sun protection applications
- Suitable for left and right-hand installation – No extra storage space is required due to the different types of drives
- No fixed buffers required for operation – Suitable for roller shutters without buffers
- Overheat protection for the motor – In the event of overheating, the temperature sensor will automatically switch off the Becker RF 12NM Motor to prevent damage
- Flexible limit adjustment tool included – Precise limit adjustment even in hard-to-reach areas
- Easy setting of final positions – This can be done without any specialist tools
- Can be combined with many Becker wall brackets – Adaptable to multiple applications
- The shutter can be wound up around the motor head – Suitable for applications with limited space
ATTENTION
- Becker RF 12NM Motor are not toys. Do not allow children to play with the control device(s).
- Becker RF 12NM motors are not waterproof. Electricity and water do not mix.
- All motors mounted externally require covering.
- All motors must be mounted horizontally.
- Becker RF 12NM motors are designed for intermittent use only. A thermal overload switch protects the motor from damage caused by overheating.
- Becker RF 12NM Motor are sensitive to impacts. Shocks will damage sensitive parts.
- Parallel wiring and dual switching of standard Somfy motors is strictly forbidden.
- Drilling into the Becker motor may cause irreparable damage
- Failure to observe the above will void the warranty of the motor and may pose a significant electrical and mechanical hazard.
-
NOTE: This price is for the motor only. The Switch, Mounting Brackets AND Drive wheel are not supplied and must be ordered separately.
-
Installation And wiring must be done by a qualified professional.
THE PRODUCTS WILL BE SHIPPED AFTER FULL PAYMENT HAS BEEN MADE.
