BECKER electric motors come with a 5-year Guarantee.
Becker Electric Motors Australia began in 2007, bringing all the ideals and philosophies of the German Head Office to the local market. Today, Becker Electric Motors Australia is one of the leading suppliers of sun protection automation in Australia.
In 1968 they released their first tubular drive for the automation of roller shutters. Becker Electric Motors Australia has since continually developed and improved its range of drives and today produces a high-quality and innovative range.
The Mechanical motors are the most basic motors within our range. They offer control of the motor via a hard-wired wall switch. These are commonly used in new homes where it is possible to run wires from the motor down to where the switch is to be located. You cannot run more than one motor from a single switch without the use of electronic relays when using a mechanical motor.
It is possible to connect a mechanical motor to a home automation system.
Up/Down Limit Setting
The Up/Down limit setting is manually done with 2 recessed progressive limits yellow/white on the motor head. The instructions for limit setting come with the Becker Electric Motors.
Features
- Supply Voltage – 230V 50Hz motor
- Torque – 50NM
- Speed – 17 rpm
- Operating the tubular motor with a switch
- Adjustment by turntables
- With 2.5 meters of wire.
- Lifting Capacity – 99Kg
- Protection Level – IP44
- Current Consumption – 1.35A
Highlights
- Universal motor – Suitable for Roller Shutter and sun protection applications
- Suitable for left and right-hand installation – No extra storage space is required due to the different types of drives
- No fixed buffers required for operation – Suitable for roller shutters without buffers
- Overheat protection for the motor – In the event of overheating, the temperature sensor will automatically switch off the Becker Electric Motors to prevent damage
- Flexible limit adjustment tool included – Precise limit adjustment even in hard-to-reach areas
- Easy setting of final positions – This can be done without any specialist tools
- Can be combined with many Becker wall brackets – Adaptable to multiple applications
- The shutter can be wound up around the motor head – Suitable for applications with limited space
ATTENTION
- Becker Electric Motors are not toys. Do not allow children to play with the control device(s).
- Becker Electric Motors is not waterproof. Electricity and water do not mix.
- All motors mounted externally require covering.
- All motors must be mounted horizontally.
- Becker Electric Motors is designed for intermittent use only. A thermal overload switch protects the motor from damage caused by overheating.
- Becker motors are sensitive to impacts. Shocks will damage sensitive parts.
- Parallel wiring and dual switching of standard Somfy motors is strictly forbidden.
- Drilling into the Becker motor may cause irreparable damage
- Failure to observe the above will void the warranty of the motor and may pose a significant electrical and mechanical hazard.
-
NOTE: This price is for the motor only. The Switch, Mounting Brackets and Drive wheel are not supplied and must be ordered separately.
-
Installation And wiring must be done by a qualified professional.
